September 1st 2006

FOR IMMEDIATE RELEASE

LYNDEX-NIKKEN’S SELF-SEALED ER COOLANT COLLETS
REQUIRE NO PERIPHERAL DEVICES TO PREVENT
COOLANT FROM REACHING THE COLLET FACE

Mundelein, IL – Lyndex-Nikken’s self-sealed ER Coolant Collets prevent coolant from reaching the collet face without the need for plugs, discs or other hardware. The ER’s patented staggered slot design works to fully prevent coolant from reaching the collet face.
For a longer life, Lyndex-Nikken ER coolant collets are made of durable solid steel, and contain no wearable rubber or silicone parts. In addition, with these ER coolant collets, drill insertion need not be longer than the collet length.

Lyndex-Nikken ER coolant collets are designed for use with cylindrical shank tools (no flats), in diameters ranging from 4 - 26 mm. Coolant pressure of 1800 psi is guaranteed – virtually unlimited pressure without failures.

Lyndex-Nikken ER coolant collets are readily available from stock. Lyndex-Nikken also stocks ER tapping collets in most ANSI sizes. Special sizes may be available upon request.

For more information, visit www.lyndexnikken.com, or contact Lyndex-Nikken Inc., 1468 Armour Blvd., Mundelein, IL 60060, Phone: (847) 367-4800.